TM Filtration – Cyclonic Separators for the Natural Gas Pipeline

TM Filtration’s Cyclonic Separator is custom designed to fit a High Pressure Natural Gas Pipeline

This unit will remove liquids and particulates without the use of a filter element.

The particulates are removed using a high speed rotating gas flow within the body of the cylinder.

Design Pressure 1,232 Psi @ 160F, Designed per ASME Code Section VIII Division 1 and “U” Stamp.


NEW — Webster Combustion’s SC Series Low NOx Burner — NO FGR REQUIRED !

We are proud to join Webster Combustion Technology in introducing their new boiler burner, the model SC Series, which they have specially designed to operate with Low Emissions without the cost and expense of external Flue Gas Recirculation (FGR) piping or associates maintenance issues. The new SC Series combines Webster’s reliable burner technology with a new, patented staged combustion firing head. The SC burner can achieve 30ppm NOx levels while maintaining a very low O2, which results in excellent efficiency, and can achieve as low as 9ppm NOx levels with an increase in O2.

If you also choose Webster’s patented Temp-A-Trim® air density trim system the SC burner will maintain even lower excess air levels as operating conditions change, saving fuel and electricity and lowering maintenance costs. The SC Series is available for firetube, watertube and other heaters and vessel types. It can fire natural or LP gas or No. 2 oil. It has lower excess air requirements for extremely efficient operation. 

Features Include: Excellent flame stability for reliable low NOx performance. Options for various NOx level requirements. Gas – 30ppm, 15ppm, 9ppm.  Oil – 60ppm. Lower Excess Air requirements for extremely efficient operation. No External Flue Gas Recirculation (FGR) required.

Webster is well known to have the best lead times in the business.  Contact us to help you configure the optimal burner for your conditions!

It’s Never Too Late to Insulate Your Steam or Hot Water System

We hope you enjoy this article from Ware’s December/January 2017 Newsletter “The Grime”

Thermal Economy Burner Management & Control Systems

THERMAL ECONOMY, iNC. provideS burner management and control systems to the power industry for fired boilers, fired heaters, heat recovery boilers, and all other related systemS.



Have a boiler that needs a control system? Look no further!  Thermal Economy is here to help.  They have control systems for boilers, burners, fired heaters, pumps… the list goes on!  Systems can be installed on both new equipment or retrofitted to existing equipment.  



The power industry is their specialty.  They have all the knowledge required to design, fabricate, test, commission and install all of their systems.  They provide turnkey services and all of the field startup and commissioning services required for a successful field implementation and startup.



Thermal Economy control systems are found in refineries, power plants, chemical & manufacturing plants, hospitals, universities & military bases.  Currently, Thermal Economy has over 250 operating systems in over 125 locations.  Two local systems are at the US Air Force Academy and Fort Carson Army Base.


Thermal Economy’s capabilities include: Burner management and control system design, PLC programming, human machine interface (HMI) graphic screen development, PLC based boiler control systems, Design and manufacture to U.L., CSA, IRI, Factory Mutual, and NFPA standards as well as customer specifications.  Systems are always designed with operators and maintenance in mind.



They have up-to-date training sessions for their employees, so as to give the customer a better experience with their customer service.  The installation process is easy and hassle free for the customer with their proficient and friendly personnel to provide construction oversight and management services.




For over 20 years, Thermal Economy has been expanding their capabilities and product scope to become the premier supplier of control and burner management systems for all types of fired equipment and other related equipment.   Contact Pentad today to discuss your new or retrofit project plans.

Neptune Chemical Pump Company – New Start-Up Procedure Video!


The following link is to Neptune’s video for Correct Start-Up Procedure

This video provides the step-by-step start-up procedure for Neptune™ 500/560/600/6000 Series hydraulically actuated pumps. Hydraulic diaphragm metering pumps are well-known for injecting chemicals into boilers and cooling towers, and in water and wastewater-treatment applications.


Please contact Pentad if we can assist with any Neptune parts or service you require!

TM Filtration & Gas Filtering Technology

From a previous posting on this site, you know that TM Filtration has developed a new Desander specifically designed to remove sand and particulates from new and capped gas wells before sending natural gas into the pipeline.


TM Filtration also builds a Horizontal Vane Separator, designed per API Specification 12J to remove particles and liquids

from a gasification process. 


New for 2017 is TM Filtration’s Gas Vane Dryer! Natural gas wells are often thought of as free flowing with no need for artificial lift. However, many gas wells produce some liquids–condensate, water or both–at some stage in their life cycles. If this liquid is not removed from the well, it will accumulate in the well bore, inhibit gas production and limit the ultimate recovery of gas from the reservoir. The accumulation of liquid in the well bore causes increased pressure against the producing gas formation (back pressure), which inhibits gas flow from the reservoir into the well bore. This back pressure also inhibits gas flow up the well bore to the surface. The liquid in the well bore also can enter the reservoir and cause a water blockage that will further inhibit gas flow into the well. Therefore, to maximize gas inflow and outflow, and to maximize ultimate recovery from the reservoir, it is necessary to remove any accumulated liquid from the well bore and keep it removed on a continuous basis.


TM Filtration has a model 356H (With a Posi-Sealoc II ® Closure) and a Model 355 with a bolted closure. Because this is a new technology, using no chemicals, and has four phases of mechanical separating technology built into the system, TM Filtration currently has a Patent Pending on this design. To make sure the natural gas is 99.99% cleaned, TM has incorporated GFM Technology ® into the final step in this new design. This new Gas Dryer Technology will remove 99.99% of all debris and remove 99.99% of all liquids greater than 0.3 Micron. This mechanical dryer can be furnished in all flange ratings up to ANSI class 900# and built in accordance with ASME section VIII Division 1, with a “U” stamp. Custom sizes and pressures available. The mechanical vanes portion are designed per the requirements of API 12J.


Thanks to Fluid Engineering/TM Filtration Spring 2017 Filtration Newsletter for this information!  Call us today to arrange a meeting to go over your gas filtering needs!


Did You Know…

Neptune Mixer Company, a division of Neptune Chemical Pump Company, has the broadest range of portable, tote, pail and drum mixers on the market. Each mixer has been designed, engineered and built to provide long life and trouble-free service in a wide variety of blending/mixing operations. So whether mixing a five-gallon pail all the way up to a 5,000-gallon tank, Neptune Mixer Company has a mixer to meet all of your applications.


We’ll be happy to help select a mixer for you – let us know how we can help!


Do You Want to Offset the Cost of Your Boiler Rental?


WARE delivers rental boilers of any size: Trailer mounted rental boilers – up to 75,000 lb/hr, Mobile boiler rooms – 50HP to 1000HP, Skid-mounted rental boilers – up to 250,000 lb/hr, Trailer mounted Superheated rental boilers – up to 75,000 lb/hr.

Ware’s high efficiency rental boilers save so much in fuel costs that the savings can often offset the cost of the rental!  Pentad is available to help you plan your scheduled shut-downs or respond quickly to your boiler rental needs.  Also, remember that WARE can deliver rental chillers of any size.  Call us today!

WARE delivers rental chillers of any size: