Kelvion’s Safetytherm Gasketed Plate Heat Exchangers – No chance of product intermixing

 

With Safetytherm you are always on the safe side. Kelvion’s developers have created a perfect design that absolutely excludes the possibility of non-compatible products mixing with each other. The Solution For Potable Water Isolation! The Safetytherm double-wall plate consists of two extra-thin plates which form a small leakage gap. The inlet and outlet openings of the plates are welded. Apart from that, their design is the same as that of conventional gasketed plate heat exchangers. In the case of a plate crack, the product will not enter the neighboring flow gap, instead entering the leakage gap. The leaking media is then conveyed to the outside via special leakage channels without any product mixing being possible.

The compact design and the functionality of the Safetytherm meets the high standard that is expected of an industry leader such as Kelvion. The ND Series shines as an effective and low-maintenance double-wall solution. Advantages at a glance – high production security with low risk of leakage. OptiWave design – for optimal media distribution. EcoLoc gasket system – for secure seating of the gaskets. PosLoc assembly – for a stable plate package.

 

REMEMBER, KELVION’S SAFETYTHERM EXCHANGERS HAVE NSF CERTIFICATION.  CONTACT US TODAY FOR YOUR POTABLE WATER REQUIREMENTS!

Aftermarket Parts & Services Together with Zeeco’s Rapid Response Team, will have your Equipment back Online

When you need the right part, right now—call Zeeco first. From flare tips to pilots and ignition systems, they’re competitive on price and unmatched in experience. The ZEECO® Aftermarket Products and Service team has both the engineering and operations experience to understand the problems you face and the timelines you work under. They typically respond to every parts and service request within 24 hours, but if that isn’t fast enough, they can deploy their Rapid Response Team… designed to deliver under challenging deadlines. With its own workflow, from purchasing and planning through testing and shipping, the Zeeco Rapid Response Team can quickly produce custom parts without the need to work around normal production.  Call Pentad / Zeeco for parts help today!

BFS Industries, LLC manufactures a complete line of boiler room and diesel generator support products, including Deaerators and Surge Systems, Boiler Feed & Condensate Systems, Fuel Systems and Control Panels.  Systems can range from very basic, to complex and highly engineered.

 

BFS has remained a constant in this industry for over 60 years and enjoys an excellent reputation for fabricating and assembling systems using only the highest quality components.

 

Pentad is proud to have represented BFS Industries for nearly a decade.  We’ve always found that BFS combines pride in engineering and workmanship, with excellent value and competitive pricing.

 

We can help with your boiler room planning or retrofit projects – call us today for a meeting or site visit.

 

 

WARE delivers rental boilers of any size: Trailer mounted rental boilers – up to 75,000 lb/hr, Mobile boiler rooms – 50HP to 1000HP, Skid-mounted rental boilers – up to 250,000 lb/hr, Trailer mounted Superheated rental boilers – up to 75,000 lb/hr.

Ware’s high efficiency rental boilers save so much in fuel costs that the savings can often offset the cost of the rental!  Pentad is available to help you plan your scheduled shut-downs or respond quickly to your boiler rental needs.  Also, remember that WARE can deliver rental chillers of any size.  Call us today!

WARE delivers rental chillers of any size:

 

From a previous posting on this site, you know that TM Filtration has developed a new Desander specifically designed to remove sand and particulates from new and capped gas wells before sending natural gas into the pipeline.

 

TM Filtration also builds a Horizontal Vane Separator, designed per API Specification 12J to remove particles and liquids

from a gasification process. 

 

New for 2017 is TM Filtration’s Gas Vane Dryer! Natural gas wells are often thought of as free flowing with no need for artificial lift. However, many gas wells produce some liquids–condensate, water or both–at some stage in their life cycles. If this liquid is not removed from the well, it will accumulate in the well bore, inhibit gas production and limit the ultimate recovery of gas from the reservoir. The accumulation of liquid in the well bore causes increased pressure against the producing gas formation (back pressure), which inhibits gas flow from the reservoir into the well bore. This back pressure also inhibits gas flow up the well bore to the surface. The liquid in the well bore also can enter the reservoir and cause a water blockage that will further inhibit gas flow into the well. Therefore, to maximize gas inflow and outflow, and to maximize ultimate recovery from the reservoir, it is necessary to remove any accumulated liquid from the well bore and keep it removed on a continuous basis.

 

TM Filtration has a model 356H (With a Posi-Sealoc II ® Closure) and a Model 355 with a bolted closure. Because this is a new technology, using no chemicals, and has four phases of mechanical separating technology built into the system, TM Filtration currently has a Patent Pending on this design. To make sure the natural gas is 99.99% cleaned, TM has incorporated GFM Technology ® into the final step in this new design. This new Gas Dryer Technology will remove 99.99% of all debris and remove 99.99% of all liquids greater than 0.3 Micron. This mechanical dryer can be furnished in all flange ratings up to ANSI class 900# and built in accordance with ASME section VIII Division 1, with a “U” stamp. Custom sizes and pressures available. The mechanical vanes portion are designed per the requirements of API 12J.

 

Thanks to Fluid Engineering/TM Filtration Spring 2017 Filtration Newsletter for this information!  Call us today to arrange a meeting to go over your gas filtering needs!