April’s Factory of the Month is Scelerin Heaters. Scelerin custom engineers and fabricates API 560 Fired Heaters and waste heat recovery units -WHRU’s- to meet your combustion needs.
Scelerin Heaters are great for use in Oil and Gas, Refining, and Chemical and Petrochemical installations.
If you are looking for a pre-engineered packaged unit, or heater revamps and field studies, Scelerin and Pentad are your go-to!
Give us a call today at 303-688-4070
We are pleased to continue our partnership with Neptune Chemical Pumps this year. Neptune provides a broad range of chemical feed equipment, including custom skids and complete packages.
Their solutions include:
Give us a call for more information on Neptune’s products, and one of our talented representatives will assist you in getting the solutions you need!
Pentad has teamed up with ALSTAM to provide excellent evaluations on new or existing burners systems. ALSTAM is built on the technical know how of COEN, ZEECO, and FORNEY burner. Their engineers are intimately familiar with all of the most widely used burners in place today.
Give us a call to address any problems you are having with burners, or if you are interested in reducing maintenance and part repair costs! We can create a solution for any burner project you have.
Our new friends over at Scelerin Heaters have recently published part 3 of their series on Fired Heaters. If you would like to brush up on your elementary combustion concepts, check out their article at the link below!
https://www.scelerin.com/scelerin-updates/2020/9/22/introduction-to-fired-heaters-part-3-burners-and-basic-combustion
It is time to replace the strainers and media.
New from Fluid Engineering is the economically designed Model 305/307, available in either flanged or butt weld connections!
The screens are similar to that of a “Y” strainer.
The Model 305 with not be hydro-tested, but will be checked by NDE (non-destructive examination).
Contact Pentad for all your straining and filtering applications!
TM Filtration’s Cyclonic Separator is custom designed to fit a High Pressure Natural Gas Pipeline
This unit will remove liquids and particulates without the use of a filter element.
The particulates are removed using a high speed rotating gas flow within the body of the cylinder.
Design Pressure 1,232 Psi @ 160F, Designed per ASME Code Section VIII Division 1 and “U” Stamp.
Ventilation Solutions that Reduce Safety Risks & Increase Efficiency
Proven & Safe
Economical
Reliable & Trusted
For the past 100 years and more, COPPUS® Portable Ventilators have been the model for performance and reliability around the globe.
They are excited and prepared to meet and perform to every current guideline & procedure by providing fresh air supply for drying and curing operations, confined space ventilation, equipment and personnel cooling.
COPPUS® steam-, air-, water- and electric-driven units are lightweight, versatile and your best option for continuous service in hazardous environments.
These high-pressure units deliver up to 17,000 cfm (28,890 m3/hr) of free air. A wide range of accessories are available to enhance convenience and safety.
COPPUS® Portable Ventilators are well suited to meet the demands of construction, maintenance and safety professionals in all industrial ventilation services, such as in the Oil & Gas, Tank Storage and Petrochemical Industries.
COPPUS® Fans & Blowers continually prove to be the safe & economical choice for degassing process equipment, holds & tanks, mechanical vapor, & gas freeing applications.
COPPUS® is well-known for increasing efficiencies in industrial sectors all over the world.
Pentad Associates would like to assist with equipment selection for new service, or replacement units or spare parts for existing equipment. Give us a call!
Do you feel like you’re watching your money vaporize with your fuel? Well E-Tech has the solution! They are a forerunner in Green engineering and manufacture Engineered Heat Recovery Products that save money and the environment.
Their engineered equipment can produce efficiencies of up to 95% from your fuel dollar while reducing pollutants in your exhaust, and their numbers are only improving. E-Tech has been engineering exacting and custom results for waste heat recovery needs since 1976. This commitment has produced thousands of designs for virtually every type of application.
E-Tech only uses the best subcontractors, making sure to hand pick the ones they exclusively know and can rely on to be as exact and thorough as they are themselves. This detailed process guarantees that every piece of E-Tech equipment will meet your needs for reliability and ensures that you will get the results you seek.
What kind of product does E-Tech engineer? They have developed a multitude of Economizers, Combustion Air, Process & Thermal Fluid Heaters, as well as their own ThermoCharger™ System and ExhaustMizer™ Exhaust Waste Heat Recovery Solution. The Boiler Room, Engine & Turbine Exhaust, Oven & Dryers, Petrochemical and Rotary Kiln are only a few of their many applications.
E-Tech is a MACT-Compliant Heat Recovery Systems Manufacturer and is compliant with the latest EPA requirements. Since one method of lowering emissions to meet certain MACT requirements is to add heat recovery equipment, E-Tech can be invaluable in helping a non-compliant boiler room with their efforts.
E-Tech is well-known throughout the industry for their custom engineering, designing and building components to work with existing configurations. Now in their fifth decade of waste heat recovery engineering there is very little they have not seen, and addressed! Pentad Associates is proud of our past years working with E-Tech, and we would be excited to work with you on any upcoming project or hard-to-source need you may have. We have many local installations – this photo is of a locally installed slurry cooler skid built by E-Tech. Please call us today!
https://www.youtube.com/watch?v=O6yQf0fG5Z8&feature=youtu.be